Luc "Thantor" Pinganaud has complected the master sculpt of Gorgr, Hafgufa of the Dur Makeb tribe. I showed a few WIP of it during the Kickstarter, but unfortunately, the project didn't reach high enough to unlock it to speed up its process of getting it released to the public. Anyway, now as it is completed, it will shortly be going away to the caster so that a handful pre-production figures can be cast (to make sure that the figure is suitable for casting, that it doesn't need parts to be resculpted, etc.). If all goes smoothly I might have the first few at me late april or start of may.
As you can see the figure is attached to the base through that broken pillar. It will obviously require some modelling work to pin it to your base, and then to make sure you add some weight in the bottom of it for its stability. But seeing how it will be cast entirely in resin the weight shouldn't really be an issue for most people.
Furthermore, the tentacles will be cast seperatedly from the rest of the body, and it will require a little bit of putty work to smooth out any gaps where they are attached in the back, but we wanted to allow people to switch the tentacles around to create another silhouette if they so desired. For the very experienced modellers, I'd also suspect that it would be doable to re-form the tentacles with applying some heat to the tentacles and then cooling them off. However, I do not recommend people to do this as there is always a risk of breakage!
Anyway, I am very happy with the result and I think that Luc "Thantor" Pinganaud has done an incredible work with it. We wanted to create a figure with lots of movement and a dynamic pose that resemble of the character being in a stalking mode with his tentacles a bit coiled, like that of a viper, ready to strike. For me, I imagine him leaping onto his prey, ready to deal the final killing blow.
While I post the above I can in the same time also post a concept art that I showed during the Kickstarter. I hope you like this one, I know I do. :)
Follow my 35 mm miniature and skirmish game project; concept arts, rules previews and miniatures will be published on the blog. Contact me on corvus.corax.miniatures@gmail.com
2/21/15
1/31/15
So the Kickstarter project has ended, and I am thrilled to say that it was a success. :) With the support gained by the backers of the project, I will now be able to release Kruuz to the market for those who might be interested. I will, of course, take care of the supporters of the KS project first, but then I will make sure that it will be available for anyone else who might be interested. :)
Thanks alot to the backers of the project. You are being a part of pushing a person's ideas forward. Without you guys this wouldn't have been possible! :)
Thanks alot to the backers of the project. You are being a part of pushing a person's ideas forward. Without you guys this wouldn't have been possible! :)
1/12/15
1/7/15
1/6/15
So it's getting closer to launch the Kickstarter project, which will hopefully help me to fund one or two miniatures for the Outcast faction (and who knows, perhaps if the project does good enough, maybe it will also be able to help me fund one or two characters of some other faction, as well).
The plan is to launch the crowdfunding either Saturday 10th January or Sunday 11th January, probably at 20.00 GMT / 21.00 CET.
Anyway, here is another sculpt of a second character of the Exiles faction - Aktra, Sword-Mistress of the Tetsu Clan, sculpted by Patrick Masson. I hope you enjoy.
Aktra will not be a part of the initial crowdfunding project, but could possibly appear as a potential stretch goal, depending on how well the project is received and how well this miniature is received.
The plan is to launch the crowdfunding either Saturday 10th January or Sunday 11th January, probably at 20.00 GMT / 21.00 CET.
Anyway, here is another sculpt of a second character of the Exiles faction - Aktra, Sword-Mistress of the Tetsu Clan, sculpted by Patrick Masson. I hope you enjoy.
Aktra will not be a part of the initial crowdfunding project, but could possibly appear as a potential stretch goal, depending on how well the project is received and how well this miniature is received.
1/4/15
12/27/14
12/22/14
12/21/14
Here is a scale shot for comparison using miniatures from other well-known ranges, to give a better idea of the actual size of the 35 mm scale of the Corvus Corax Miniatures range.
From left to right, the red lines are at 0 cm and 3 cm.
Top row:
Middle row:
Bottom row:
From left to right, the red lines are at 0 cm and 3 cm.
Top row:
- Ilyad Games Virago - Corvus Corax Miniatures - Warhammer Chaos Beastlord - Corvus Corax Miniatures - Infinity Hassassin Fiday - Corvus Corax Miniatures
Middle row:
- Confrontation Kelen 13th Voice - Corvus Corax Miniatures - SIMON Miniatures Goliath - Corvus Corax Miniatures - Infamy Miniatures Sherlock Holmes - Corvus Corax Miniatures
Bottom row:
- Confrontation Kelt Fiannas - Corvux Corax Miniatures - Mierce Miniatures Carrowek - Corvus Corax Miniatures - Mierce Miniatures Beowa - Corvus Corax Miniatures
12/18/14
Hopefully, I'll be able to run a successful campaign on Kickstarter, which would help me to greatly speed up this project and have new miniatures available to the market. :) The campaign would be, initially, for the three outcast characters that have been shown here, on the FB page and on various forums. :) I just hope that there will be enough support to help me reach the funding goal.
If you can, and if you want to, please help me to spread the word. :)
If you can, and if you want to, please help me to spread the word. :)
Subscribe to:
Posts (Atom)








